Turning Plain Glass into Spring Charm

Have you ever almost walked past something plain… only to realize it could become something adorable?
That’s exactly how this sweet Easter cutting board begins. A simple glass board transforms into a nostalgic bunny scene using reverse decoupage, gold details, and waterproof finishes. This project is charming enough for display, yet durable enough for light kitchen use.

Be sure to watch the full video tutorial below before you begin.

Step 1: Preparing the Glass

Since this is a reverse decoupage project, all work is done on the back side of the glass. Start by removing the rubber feet temporarily and wiping the surface with alcohol to remove fingerprints or residue.

Painter’s tape is applied to create one-inch gold stripes at the top and bottom. Pentart Gold paint is dabbed on with a sponge applicator, and the tape is removed while the paint is still wet for clean lines. Once dry, any Sharpie guidelines on the front are removed with alcohol.

Step 2: Creating Adhesion on Glass

Glass is slick and non-porous, so adhesion matters. A coat of Polyvine Multi Surface Lacquer (Dead Flat) is brushed over the back of the glass. This removes shine and creates a gripping layer so rice paper and varnish won’t chip or peel later. Let this dry overnight for best results.

Step 3: Applying the Bunny Rice Paper

The bunny rice paper is trimmed to remove unwanted borders and positioned so its edges sit directly over the gold stripes. This clever placement hides the paper edges for a seamless look.

Using Polyvine Exterior Extreme Varnish, brush a layer onto the glass and over the rice paper. Lay a lightly misted plastic sheet on top and gently smooth out bubbles and wrinkles. Allow several hours to dry.

Once dry, sand downward along the edges using medium-grit sandpaper to remove excess paper cleanly. To prevent transparency and make the bunny image vibrant, paint white over the back of the bunny rice paper using Dixie Belle Chalk Paint in Cotton. Two coats ensure opacity.

Step 4: Adding Coordinating Borders

A subtle coordinating rice paper is cut into 1½-inch strips and applied to the top and bottom sections using Exterior Extreme Varnish. These strips slightly overlap the gold stripe for a layered look.

After drying, sand the edges downward just as before. Apply another coat of varnish and allow to dry for about an hour. The coordinating border paper is also painted white with two coats on the back to block any show-through. Once dry, lightly sand to smooth imperfections.

Step 5: Finishing the Edges

The underside areas are painted Pentart Vintage Green, complementing the rice paper tones. The flat edge of the glass is painted gold using a sponge dauber for clean application.

Any stray paint on the glass front is wiped away immediately with a damp towel or glass cleaner for a crisp finish.

Step 7: Waterproof Sealing

To make the board functional, apply three coats of Polyvine Exterior Extreme Varnish to the back and edges, allowing one hour between coats.

Once fully cured (a minimum of five days), the board is waterproof. It should be hand washed only and never soaked or placed in a dishwasher.

Reattach the rubber feet, and your Easter cutting board is ready for display or light use.

Stay Connected

Before you go, be sure to subscribe to our newsletter. You’ll receive 10% off your next order, along with early access to new arrivals, restocks, seasonal projects, and special offers just for subscribers. We love crafting alongside you and can’t wait to see what you create next.